1970 442 Exhaust Systems - Gardner Exhaust Systems - 1970 442 Exhaust Sytems by Gardner


	Buick

	Camaro

	Chevelle

	Corvette

	El Camino

	Firebird

	GTO

	Tri Five Chevys

	Impala / Caprice / Biscayne

	Nova

	Oldsmobile

	Mopar

	AMC

1970 Oldsmobile 442 and Hurst Olds

The 1970 Oldsmobile 442, Hurst Olds And Rallye 350 exhaust systems consisted of 2 1/4" head pipes and 2' tail pipes with chrome trumpets welded on. Our reproduction exhaust system for these cars comes with the correct head pipes, flanges, tail pipes with correct welded on trumpets. (W-31 cars used a similar exhaust system, however the tail pipes were just angled down and no tip was welded on) The kit also includes correct mufflers, installation instructions, diagrams, sealant, clamps and correct front hangers. Our reproduction tail pipe hangers are available. Ask about our concours show pkg. for those of us when original is not good enough.

Ask about our turbo mufflers for a little extra roar!

1970 442 / Hurst Olds Kit	1970 W -31 Kit

1970 Oldsmobile 442 Restored by Jason Stritesky Equipped With Gardner Exhaust

1970 442 W-30 Restored by Mike Blakenship Equipped With Gardner Exhaust

1968 - 1972 GM A- Body Front Hanger

These hangers are correct for 1968-1972 GM A-Body Exhaust Systems.For the longest time the only hangers available were actually for the 1964 - 1967 GM A body's. Alltough th hangers look extemely similar and will work just fine That is not good enough for Gardner. The hangers you see here are identilcle reprodutions of the unique 1968 to 1972 GM A body hangers. They have been painstakenly reproduced from our originals and come zinc plated hand built with lthe correct corded rubbers and button head rivets, zinc plated retainers and correct screws. They come standard with our 1968-1972 GM A body exhaust systems and are a Gardner Exclusive reproduction.

1964 - 1972 GM 2" Strap Clamp

This strap clamp was used on many of the GM - A Body Muscle Cars. It was used to attach the tail pipes to the tail pipe hangers. Our strap clamps have been reproduced from an original and come zinc plated with the correct sheet metal screw. They come standard with our concours show pkg. or can be optioned with one of our entire systems.

1970 - 1972 442 Tail Pipe Hangers:

These hangers are a reproduction of the orginal hangers used on the 1970 - 1972 442 and Hurst Olds Exhaust Systems. They come built with corded rubbers, button head rivets and zinc plated. They are available with our 1970 -1972 Hurst Olds and 442 exhaust systems

1964 - 1972 GM A - Body Retainer

These retainers were used on the GM A - Body Muscle cars on the muffler hangers. The attaching screw first went through this reatiner and then through the rubber. The reatainer functioned as a washer to protect the rubber on the hanger. Our retainers have been reproduced from the orginal in the picture and come zinc plated. They are a Gardner EXhaust exclusive reproduction and come standard with our concours show pkg. or can be optioned for with one of our entire systems.

1968 - 1972 442 and Hurst Olds Tip

This is the correct reproduction tip for the 1968 - 1972 442 and Hurst Olds. Although it is not one of our reproductions we have compared them to the original and we are pleased to offer them welded on our reproduction tail pipes as original.